Impact Beds and Support Rails Impact Skiderbed Belt Support System is of a modular construction with a fixed trough angle. The frame is fully assembled and painted.
The top corner/edge is rounded, unlike other manufacturers that are manufactured with 90 deg sharp edge. Sharp edges on top of bar can cause damage to belt on impact. U.H.M.W.P.E top layer is 12mm thick for extra long wear.
Conveyor Products: Brelko
Total Transfer Point Spillage Control
The Company: Brelko Engineering cc specializes in, and is dedicated to the development, production and marketing of an exclusive range of products for the bulk materials handling industry. Brelko products are primarily intended to assist in the control of spillage, carryback and dust, as well as promoting trouble free flow of material at belt conveyor transfer and load points. Brelko is accredited with ISO 9001 certification � your assurance of the best quality.
Brelko Belt Scrapers A complete range of primary and secondary scrapers, V and Angle ploughs. Scrapers feature the patented V base torsion holder mounting. The system is designed to make maintenance and blade changing as simple as quick fit. The removal of the scraper from the structure is therefore not necessary.
Screening Products: Rubber Screencloths and Panels
Slotted Aperture – available with flow or crossflow
Impact Beds and Support RailsCross Tensioned Rubber Screen Cloths Used for medium coarse to fine screening applications. Manufactured from a rubber compound that offers screening efficiency and extended wear life. For conditions that are highly abrasive, we can offer our polyurethane on rubber screen cloth. Both our rubber and poly on rubber screencloths are cord reinforced to eliminate stretching of the rubber during installation and operation.
Modular Screening Elements Used in course to medium screening applications. Manufactured with a rubber compound that is considered to be the ultimate for this application. The use of this rubber will reduce noise, reduce blockage and offer exceptional wear capabilities.
Abrasion Products: Abrasion & Impact Resistant Lining Rubber
We can offer a range of sheet rubber compounds for protection of plant and equipment against abrasion, impact and corrosive attack. Compounds can be supplied in either precured sheets or uncured calendered sheets.
The correct selection of rubber grade and thickness will enable resistance to a wide range of operating conditions.
Typical products include:
35-40 hardness which are particularly suited for small particle size wet and dry abrasion protection. Typical applications include flotation cells, cyclones, pipework, classifiers, tank and chute linings.
60-70 hardness which exibit high impact and tear resistance. Typical aplications include the lining of chutes, bins, screen components, pulley lagging, mill feed spouts and vibrating feeders.
Butyl rubber is a heat and chemical resistant rubber sheeting particularly towards acids. Applications include acid storage tanks, electro winning cells, metal treatment tanks, fertiliser plants, ion exchange vessels, elution colums and associated tankage.
Conveyor Products: BRELKO
Total Transfer Point Spillage Control
Brelko Engineering cc specializes in, and is dedicated to the development, production and marketing of an exclusive range of products for the bulk materials handling industry. Brelko products are primarily intended to assist in the control of spillage, carryback and dust, as well as promoting trouble free flow of material at belt conveyor transfer and load points. Brelko is accredited with ISO9001 certification -your assurance of the best quality.
BRELKO Chute Sealing Systems (Keyskirt)
This patented chute sealing system is available in four sizes, each designed for a specific range of applications.
This is a self adjusting flexible skirt sealing strip designed to be used with light weight conveyor belts. It is also available in a non toxic rubber grade with stainless steel track for the food industry.
This is a self adjusting flexible skirt sealing strip featuring the patented Brelko multiple lip seal designed for rugged transfer applications. Specially formulated rubber compound ensures maximum seal life.
A highly abrasion and cut resistant polyurethane sealing strip is mounted in the patented Brelko track system which features simple adjustment to allow for skirt wear. The system is designed to provide optimum containment of large lumpy material and is especially effective when used in conjunction with Brelko Feedboots.
This is a self adjusting flexible skirt sealing strip featuring the patented Brelko multiple lip seal designed for rugged transfer applications. Specially formulated rubber compound ensures maximum seal life. For use on belts wider than 1200mm.
BRELKO Belt Support Systems
Brelko Feedboots are designed to be used at load points to support the conveyor belt, preventing belt sag between idler rolls and thereby ensuring maximum skirt sealing and spillage control. UHMW Polyethylene material is used to line the load surfaces and therefore dramatically reducing friction and wear.
This model features adjustable wing plates to allow the belt troughing angle to be accurately accommodated thereby assisting in maintaining correct belt tracking and complete skirt sealing.
In this model the load surfaces are mounted on rubber spring units allowing deflection under load conditions while still maintaining a form seal line for the skirt system. It is used where variable load conditions with relatively small particles are encountered.
Hi-Impact Idler (BTA)
This system has been developed to be used in conjunction with garland idlers to absorb large impact loads due to the transfer of very large lumps of material. Mechanical damage to conveyor idlers, cradles and supporting structure are thus greatly reduced or eliminated.
BRELKO Blockage Removal and Bulk Flow Maintenance Systems
Brelko Air Cannons use the patented Brelko diaphragm discharge system. The only moving part is a flexible rubber diaphragm which ensures totally trouble free operation even in extremely dirty and hostile environments. Used in conjunction with the Brelko Air Lance discharge nozzle, the build up of fine materials in chutes, hoppers etc. can be prevented this avoiding blockages and flow stoppages.
BRELKO High Pressure Dust Suppression and Belt Wash Systems
Brelko Engineering has developed a range of modular high pressure pump units which when used with the appropriate nozzles and control circuits provide a fine water mist for the suppression of dust at transfer points and secondly can provide a flat high impact spray for the removal of fine residual material from the belt return strand. In both cases the systems are characterised by the use of high pressure water (30 to 40 bars) therefore only a very low flow rate is required to achieve the desired result and does not require compressed air for the atomisation.
Sureguide Belt Trackers
Widely used in the mining industry and other conveyor related industries, the SureGuide� responds instantly to the misalignment of the belt and does so without special modifications to the structure. The SureGuide� accommodates belts ranging from 450 – 2300 mm. Frame and guide rollers are often the cause of belt damage, which reduces the lifetime of the belt. The SureGuide� requires little or no maintenance and fits into a standard drop bracket. The SureGuide� belt Centralizing Return Pulley can be manufactured to suite all belt sizes in operation, in any country. Special design requirements are possible at little or no additional charge, E.g. Shaft dimensions and lengths.
The design and Manufacture
The SureGuide� is a quality product that is made of precession turned C.N.C components.
Special hardened steels and other alloys ensure that the SureGuide� performs optimally over a extended period of time, in the toughest conditions.
The bearings in the SureGuide� continuously run in oil thus prolonging its life span.
The SureGuide� is a fully serviceable product and carries a 2 year warranty.
For the correct tracking and alignment of conveyor belt on short centered or reversing conveyors.
Captures the return strand of the conveyor belt in a �Tunnel� created by the trainer and the existing conveyor return rollers.Ensures the correct alignment of conveyor belt over head and tail pulleys and under load points.
By ensuring the correct alignment of the conveyor belt on short centered and reversing conveyors, problems of belt edge damage and material spillage at load points is reduced or eliminated. The Razer TunnelTrak� Belt Trainer also helps to maintain a clean and safe working environment thus reducing the total cost of conveyor systems ownership.
Ideal for short centred conveyors where reaction times of conventional trackers is insufficient.
Razer TunnelTrak� Belt Trainers are manufactured from stainless Steel. All bolts and nuts are also 100% Stainless Steel.Razer TunnelTrak� are designed to multi-fit to a broad range of conveyor widths. Three basic sizes cover all widths from 450mm to 1800mm conveyor belts.Is easily relocated to any point on the conveyor or to other conveyors within the unit size range.Is fitted and adjusted to the conveyor in minutes.
Best for process and batching plant conveyors where short centred and or reversing conveyors are used.